4 Common Stihl 462 Problems + Troubleshooting

This article may contain some affiliate links and if you make a purchase after clicking on any of teh links, we may earn a small commission at no additional cost to you.

The Stihl 462 is one of Stihl’s chainsaws prone to mechanical problems. But it is natural, as with any unit, to have shortcomings, even the best products have a couple.

The question you should be asking is: how do you tackle these Stihl 462 problems effectively when they arise? 

Below, we have outlined some of the common stihl 462 problems along with expert advice on how to resolve them. 

4 Common Stihl 462 problems + Troubleshooting

1. Starting Problems

You are kitted up and cracked your fingers to take on those felling, bucking, and delimbing large tree duties only to have difficulties starting the stihl 462. 

Before you start wallowing in self-pity, have you checked the fuel?

Sometimes, using old or stale fuel puts the engine to sleep. 

If the fuel is old, you must drain and replenish it with fresh fuel and the correct oil ratio.

Furthermore, faulty or dirty spark plugs can result in starting problems. If necessary, clean or replace it before starting the engine.

2. Constant Loose Of Chain

In the course of using the Stihl 462, you will encounter chain slack. 

This one is pretty straightforward. You will have to inspect the chain tension. If saggy than expected, tighten a bit. 

Mind you, the chain should slightly sag, as excessive tightness will hamper performance. A simple adjustment with a screw clockwise will tighten the chain while loosening it counter-clockwise.

To do this right, you must refer to the user guide. If there is any damage to the chain, endeavor to replace it. 

3. Malfunctioning Bar Oiler

Malfunctioning bar oiler problems aren’t a big deal, although if left untreated, the sprocket could wear due to excessive oil buildup. 

Under-oil distribution could also heighten kickback, chain wear, and dullness chances.

Fortunately for us, there are a few components to be held responsible. 

First is the chainsaw’s oil reservoir. Ensure it is gauged with the appropriate type of bar oil

Clogs in the oil ports, channels, or filters are also problematic. So clean to ensure proper oil flow.

4. Engine Overheating

Three things often lead to engine overheating. 

One is inadequate lubrication. Since proper lubrication Soothe friction and heat generation, insufficient lubrication does the opposition. 

So, feed the oil reservoir with the right amount of chain oil. The oiler system (the pump and passages) should be free of any obstructions. 

Secondly, a lean fuel mixture could trigger the engine to run a temperature since it upsets the carburetor adjustments or fuel system.

Inspect if the air-fuel mixture is intact and adjust according to the manufacturer’s specifications. The fuel system should also be clean and free of debris.

And lastly, a clogged or dirty air filter Blockage. 

The sole purpose of an air filter is to purify the air intake to the engine –trapping any particles. 

However, if it is clogged, it will restrict airflow to the engine —thus leading to overheating. Always ensure your air filter is clean and isn’t damaged. 

Frequently Asked Question

Where Can I Find Replacement Parts And Accessories For My Stihl 462? 

Finding Stihl’s replacement parts or accessories isn’t that hard, considering they are in popular demand. 

You can walk into any authorized Stihl dealerships and make a request. These dealers have a wide selection of Stihl products’ replacement parts and accessories —from old to new models.

And if you are unsure about the size, length, or type of parts you want, there are knowledgeable staff that will help you sort it out. 

Reputable online retailers are another reliable source to scavenge for Stihl parts and have them delivered right to your doorstep. Or better still, visit Stihl’s Online Store.

How Can I Prevent These Stihl 462 Problems from Happening?

The saying “an ounce of prevention is worth a pound of cure” has never been more true. It is much easier to avoid trouble than to get out of it. 

A good way to do this is through proactive maintenance.

Make it a priority to conduct a good clean after each use and a routine to follow the maintenance schedule outlined in your user manual.

In general, treat your stihl 462 like your baby. Lie it down gently in a dry and secure place, using a protective cover to shield it from dust and debris. 

How Many Times Can You Sharpen A Chainsaw Chain Before Replacing It?

7 to 10 times, give or take, depending on the frequency of use and how demanding the job is. 

A quality chain will undoubtedly last longer, allowing more sharpening than a low-grade one. But the type of material you cut also plays a significant role in chain wear. 

How Long Does Chain Saw Oil Last?

A newly bought and sealed chain saw oil has a shelf life of about three to seven years.  But it depends on the quality and additives used in production. 

Synthetic-based oil will last longer than mineral and plant-based oil. The oil base tells their longevity since it degrades at a different pace. 

Can You Reuse Chain Saw Oil?

Inexperienced owners reemploy used oil in the vain hopes of saving money. But it will only cost them more money.

This is because used oil has already deteriorated and contaminated, making it less effective at lubricating the chain or guide bar. 

Using it will only increase major components’ friction, heat, and wear instead of preventing it.  

ALWAYS use fresh, high-quality chainsaw oil and replace it when need be. 


If I’m being honest, these Stihl 462 problems will come. So be prepared! 

How you handle the problem determines everything. 

Some will run crying to their mechanic, offering them the first amount they demanded. I mean, there is no shame in that. But the true weapon is regular maintenance. 

If you can be strict with the maintenance policies, you will flipflop past 99.9% of stihl 462 problems.