6 Common John Deere 1025R Problems + Troubleshooting

This article may contain some affiliate links and if you make a purchase after clicking on any of teh links, we may earn a small commission at no additional cost to you.

If you’ve been a farmer for quite a while, you must have heard of the John Deere 1025R tractors. Although these tractors are excellent and reliable, some users also complain about their transmission and electrical issues, in line with several other problems. 

Among all other issues, some of the most common John Deere 1025r problems that you are most likely to encounter with include engine issues, hydraulic issues, transmission overheating problems, etc.

But not to worry, in this article, we will be guiding you on several ways you can troubleshoot and fix these issues as we address them on the way.

John Deere 1025R Problems and Possible Fixes 

1. John Deere 1025R Transmission Problems 

Transmission issues render your device useless. Your tractor has a transmission issue and won’t move an inch even if the engine is on and working. The good news about this is that it is something that you can fix from the comfort of your home, and you might not even need professional guidance.

See Also: John Deere 1025r Vs 2025r Tractors

The most common reason why your tractor might be experiencing transmission issues is due to low oil. When your hydraulic oil is below the minimum threshold, your tractor won’t move.

You can fix this by filling the oil up to the required level, but you should ensure that it is not cold before replacing it. Cold oil is not advisable for any engine, so we suggest you let the oil warm up for a bit.

2. John Deere 1025R Hydraulic Problems

The hydraulic system in most powerful devices aids in driving fluids, which applies to the John Deere 1025r tractors. Even with the high level of importance this hydraulic system holds, it is not user-friendly as many users complain about the system deteriorating over time.

The hydraulic system works according to the pressure law, and if the pressure of this fluid is affected, the stress and the entire machine suffer. Water Is the most common fluid that tampers with the level of balance of the liquid and pressure.

So, if water gets into your hydraulic oil, you can drain it and fill it with fresh oil with the appropriate hydraulic type. After doing this, your tractor is sure to be working again.

3. John Deere 1025R Engine Problems

The engine of the John Deere 1025r tractor is the most powerful component of this tractor, and you can say it is to be the backbone of the John Deere tractor, and if it doesn’t function well, your tractor Is not even going to work well and even worse, won’t start up at all.

The most common reason your engine might be faulty is when you keep the gear in a neutral position. When running the engine, your bag should either be at a low or high range. Another reason why your engine won’t move is if you have stale oil running your system.

A quick remedy for this is draining the old oil from your system and replacing it with fresh hydraulic oil with a higher viscosity.

4. John Deere 1025R Overheated Engine 

When your engine’s temperature is constantly overheating, this might reduce the longevity of your device. And in most cases, the debris accumulates on your radiator and causes it to overheat. Cleaning your radiator fins might be too stressful to do consistently, so ensure that you do that frequently.

Also, when you do not arrange your fan belt correctly, it can lead to the overheating of your engine. So. Ensure that you keep your belt in position at all times.

5. Breaks And Steering Issues

When your brakes and steering are the problems, that is a fatal issue, and you need to handle it appropriately and fast. When your brakes or steering default, you should check the oil filter, inflation and steering rate to ensure it is all in place.

And if these parts are defective, ensure that you repair them or, better still, replace them. To take care of your air filters, ensure you clean them regularly, so dirt does not clog them.

6. John Deere 1025R Electrical Issues

A damaged battery is one of the major problems that users complain about the tractors. In most cases, either the battery is not charging, or its terminals are corroded, which causes high current resistance. 

To handle this issue, ensure that the terminals between the batteries are kept clean and check the battery connection to ensure that you place them correctly. To prevent this issue, ensure that you always tighten your engine belts and replace them if your batteries are old or faulty to the point they cannot repair. 

Frequently Asked Questions 

Does The Hydraulic Fluid Type I Used on My John Deere 1025r Tractor Matter?

Although most hydraulic system is very versatile and can work with several types of hydraulic fluids, you should be very careful about the kind of oil you use on your hydraulic system. You have to consider picking the correct viscosity grade, as it doesn’t matter how good the other fluid components are if the quality is off. 

For you to determine the proper grade for your John Deere 1025r tractor, you should consider the following; 

  • Starting the viscosity at minimum ambient temperature. 
  • Also, consider the maximum temperature the device is expected to work at the maximum ambient temperature. 
  • Consider the permissible and optimum viscosity range for the components of the system. 

Can I Use Hydraulic Oil Instead of Hydraulic Fluid?

Hydraulic oil is just the non-compressible version of the hydraulic fluid, and you can use it to transfer power within the hydraulic equipment and machinery. So, you do not have to be bothered if it is called hydraulic fluid or oil; in most cases, they are the same. 

How Do I Know That My Hydraulic Oil Is Bad?

It is straightforward to notice if your hydraulic oil is going bad. If your hydraulic components stick to each other when operating, your hydraulic oil is most likely going bad. You should act fast when you notice that your hydraulic oil is going wrong because if you turn a blind eye to this, it can damage your whole engine in the long run. 

How Long Is the Warranty on The John Deere 1025R?

If you get your John Deere 1025R tractor from an authorized dealer, then you have a warranty of 6 years, which is about 2000 hours, but that doesn’t mean you shouldn’t take good care of your machine and get it serviced adequately. 

Is The 1025r John Deere Series Worth the Money?

It might seem like a lot, but in the long run, you will realize that these tractors are worth every penny you spend on them. The only restrictions might be the bells and whistles it comes with, but if you don’t care about these whistles and bells, then you’re good to go.

See Also: Problems with John Deere 2025r Tractors

Is The John Deere a Four-Wheeled Drive?

Yes, the John Deere 1025R tractors are 4-wheel drive and also a power steering, and with this, it allows the user to maneuver quickly and, in turn, gets operation done faster. 

Scroll to Top